video capture issues
Printed From: iAMGaming.com
Category: Off Topic Forums
Forum Name: Headsets and other accessories
Forum Discription: What equipment has improved your gaming experience?
URL: http://www.iamgaming.com/forum/forum_posts.asp?TID=4261
Printed Date: 07 Nov 2024 at 7:09pm
Software Version: Web Wiz Forums 9.72 - http://www.webwizforums.com
Topic: video capture issues
Posted By: Fluffy Fluffington
Subject: video capture issues
Date Posted: 05 Jan 2010 at 1:54am
|
so i got Pinnacle studio moviebox plus output to pc is simple enough input from Tv is component cable ... BUT: everytime i hit capture on the software i got a message that There is no input signal! Any thoughts ... ------------- http://www.enjin.com/bf3-signature-generator" rel="nofollow"> 
|
Replies:
Posted By: Dr4g0v
Date Posted: 05 Jan 2010 at 10:38am
|
i've problem with my Dazzle black prenium.
when you recording in VGA (red yellow white) can you play in HDMI 720P -------------  |
Posted By: Heavenly_tRiNiTy
Date Posted: 05 Jan 2010 at 1:51pm
Fluff check the driver that comes with it is the one being used. Did it install OK? What OS are u using? Can u see what ur capturing on pre-screen b4 u hit capture? Also does it connect straight to ur sound and graphics card? (guessing its USB and doesn't). What r u up to mate? capturing from PS3 display?? ------------- Cos I'm Wonderman...I'll take that knife and shove it up your a$$! |
Posted By: Fluffy Fluffington
Date Posted: 05 Jan 2010 at 2:20pm
and no i ma not seeing anything anything on prescreen. ------------- http://www.enjin.com/bf3-signature-generator" rel="nofollow">
|
Posted By: Heavenly_tRiNiTy
Date Posted: 06 Jan 2010 at 4:06pm
Look to see if the Pinnacle studio software is using the correct driver/codec to allow you to do this. There should b and option to change. Also USB setup can b hit and miss especially on a laptop. I presume its a good spec and using USB 2.0? ------------- Cos I'm Wonderman...I'll take that knife and shove it up your a$$! |
Posted By: Carn4ge 0
Date Posted: 06 Jan 2010 at 4:19pm
|
I forget what video capture card that I have but it has a breakout box behind my desktop as well. The breakout box has component plugs on one side, and composite plugs on the other. Strangely enough, only the component plugs are inputs. The composite are outputs from the laptop. I don't have a PS3 but if you can component output from the PS3 into the breakout box you can probably get something, lesser quality of course.
-------------  |
Posted By: Fluffy Fluffington
Date Posted: 06 Jan 2010 at 6:05pm
------------- http://www.enjin.com/bf3-signature-generator" rel="nofollow">
|
Posted By: Carn4ge 0
Date Posted: 06 Jan 2010 at 7:39pm
|
I think I screwed up what I was trying to type earlier. Basically, the breakout box that came with my card had both component (RGB) plugs and composite (RCA) plugs. It would only accept input through the composite (RCA) plugs though. The composite (RGB) plugs on the breakout box were for outputs to the tv. Yours may be saying no input because it only accepts input from the composite (RCA) plugs. I had to rig mine up be outputting to RCA cables from my xbox 360, using Y-splitters to split the outputs, then plugging one of each into the tv and one of each into the capture card. If this is the case for you then you'd be screwed unless you can get a composite (RCA) output from the PS3. ------------- |
Posted By: Fluffy Fluffington
Date Posted: 07 Jan 2010 at 12:02pm
------------- http://www.enjin.com/bf3-signature-generator" rel="nofollow">
|
Posted By: Heavenly_tRiNiTy
Date Posted: 07 Jan 2010 at 1:43pm
Hmmn how comes? Can u get any signal through the box? this is a little difficult to imagine got any pics??? Anyway cant u use both HDMI and AV leads from PS3 to TV then output from AV out or split signal to breakout box input? Also USB inputs to a laptop sometimes creates resource issues so avoid multiple inputs (use serial ports at back or mousepad and detach all else) into the bus. Again worth saying - check driver status and device manager to see if all's good. Sorry to say im glad i didnt buy one for my mac last week i was tempted as it was £60 from £80. Might still do it cos i can return if it doesnt work. Good luck! ------------- Cos I'm Wonderman...I'll take that knife and shove it up your a$$! |